This outrunner motor is mainly designed for micro size helicopters, such as Walkera V120D05, M120D01, V120D02S etc. For maximum life, please ensure that the bearings are maintained properly; put a small drop of bearing oil on each bearing every 5 flights. And please make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding and causing over load to the motor.
| Motor Kv: | 15500 RPM / Volt (KV) | | No-Load Current (Io): | 1.2 Amps @ 3.5volt | | Max Continuous Current: | 9 Amps | | Weight: | 6.8 grams | | Diameter: | 16.0 mm | | Length: | 14 | | Shaft Diameter: | 1.5 mm | | Shaft Length:: | 6 mm | | Distance Between Holes | 8.50 / 8.5mm, M1.4 screw | | Max Lipo Cell: | 1 Cell |
|
