This outrunner motor is mainly designed for running with 7.4v lipo, on micro size helicopters, such as Walkera V120D01, D02, D03, D05 4G6, 4G3, etc. with 15t to 17t pinion.
Xtreme has done a great job with the their new line of 6.5g brushless motors! If your looking for power, this is for you! Since it's a 2-cell motor, we recommend using the Oversky XP-12A ESC.For maximum life, please ensure that the bearings are maintained properly; put a small drop of bearing oil on each bearing every 5 flights. And please make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding and causing over load to the motor. 
| Motor Kv: | 8800 RPM / Volt (KV) | | No-Load Current (Io): | 1.1 Amps @ 3.5volt | | Max Continuous Current: | 8 Amps | | Weight: | 6.5 grams | | Diameter: | 13.6 mm | | Length: | 18.2 | | Shaft Diameter: | 1.5 mm | | Shaft Length:: | 6 mm | | Distance Between Holes | 8.50 / 8.0 mm, M1.4 screw | | Max Lipo Cell: | 2 Cell
|
|
