Package includes Program Card and Adapter (for 1S Batteries). The adapter is 100% necessary to program the ESC.
Program Card can display and modify the parameter item by the 4 digits LED and 4 buttons. When each parameter setting is set, push write key. All parameters can be saved into ESC automatically.
Two of the parameters can be set with a specific value in a range allowing for a highly customized configuration:
1. Low Voltage Protection Threshold: user can set proper voltage threshold according to cell quantity in range of 0.0-49.9V.
2. Start power: can be set in range of 0% - 29%. User can use different starting powers according to different conditions.
The function keys:
|
|
|
É |
WR |
|
Used to move the cursor horizontally; and also to modify the value which is more than one digit. |
Serves two functions:
1. To browse each parameter; and
2. To modify option or value of the parameter when entering this parameter item. The value is from 0 to 9 in loop. |
Serves two functions:
1. When displaying a parameter item, press the key to enter this parameter item. When the parameter value is flashing, you can modify the value.
2. When done modifying, press the key to confirm the parameter value and exit. |
Setting is done, press WR key to save setting parameter to ESC. |
Program Procedure:
1.Properly connect the PPM wire of ESC to program card.
2.Connect the battery to ESC, program card will display READ, the program card can automatically detect if the ESC is used for Car or Plane and will read all the parameters.
3.Display the version of the ESC. If the ESC is set for Plane, it will display P x.x; if the ESC is set for Car, it will display C x.x. It will then display the first item after one second.
4.Press key to browse parameter items.
5.Press É key to enter the item which you wish to modify. After entering the item, the parameter value is flashing.
6.Press key to modify value (if the parameter value is more than one digit. press key to shift to different digits.)
7.Press É key to confirm the modified value and exit.
8.Press WR key to save the setting parameter to the ESC, and good will be displayed.
When connecting Program Card and ESC, the program card can automatically detect if the ESC is used for Car or for Plane and read parameters from ESC.
Configurable parameters:
|
Item |
Specification |
Option or Value |
Default |
|
Cut Off Voltage |
Low Voltage Protection Threshold |
00.0V－49.9V |
00.0V |
|
StartPower Percent |
Start Power Percent |
00%－29% |
00%(automatic) |
|
Advance Timing |
Timing Mode |
(1)Low；(2)Mid；(3)High；(4)Highest |
Mid |
|
Brake Type |
Brake Mode |
(1)Off；(2)Soft；(3)Hard |
Off |
|
Start Mode |
Start Mode |
(1)Fast；(2)Soft；(3)Very Soft |
Fast |
|
Cut Off Type |
Low Voltage Protection Mode |
(1)Reduce Power；(2)Cut Off |
Reduce Power |
|
Throttle Curve |
Throttle Curve |
(1)Curve1；(2)Curve2；(3)Curve3 |
Curve1 |
|
Motor Rotation |
Motor Rotation |
(1) Forward；(2) Reverse |
|
|
