Get the best performance from your Walkera with Oversky's new HP06V2! This outrunner is rated at a crazy 16,200KV! If you want to shave weight, but keep the power, this is the way to do it. Oversky HIGHLY recommends using the Oversky 12A ESC direct solder. 12T or 14T pinions are recommended for the V120D01 or 4#6.
BEST PERFORMANCE IS ACHEIVED USING THE OVERSKY 500mAh 25C BATTERY OR THE OVERSKY 400mAh 20C BATTERY.
KV: Approximately 16500 (motor KV can vary between 16000 and 17000). KV documentation provided by Oversky.
Idle current:1.1A/3.5V
Weight:6.5g
Diameter:13.8mm
Length:15mm
Diameter of shaft:1.5mm
Shaft length:6mm
Screw size:M1.6, distance between two screw holes is 8.55mm
Note: This motor does NOT include a Pinion. Please make sure to add a pinion(s) to your order!
|
